Huth Pipe Benders

CALL OR TXT (941) 232-4627

HB-10 Bender2

Click Above for Larger Picture

THE HB-10

On Sale Now! $8675.00
Free Shipping on Huth Pipe Benders!

Contact us with any questions

AVAILABLE FOR IMMEDIATE SHIPMENT 

The HB-10 Huth Pipe Benders is Huth’s entry-level Huth pip bender, designed to introduce you to Huth quality while showing you the incredible profit potential.

HB-10 can bend up to 3″ tubing and includes a built-in swager/expander for complete end-finishing.

The HB-10 is available in 220 volt, single or 3 phase, 60 or 50 Hz.

* The HB-10 package includes:

5530 5″ Radius Die 3″
5412 5″ Radius Die 2-1/2″
5414 5″ Radius Die 2-1/4″
5200 5″ Radius Die 2″
4414 4″ Radius Die 2-1/4″
4200 4″ Radius Die 2″
3134 3″ Radius Die 1-3/4″
3112 3″ Radius Die 1-1/2″
1350 Full Back Shoes 3″ (2)
4412 Full Back Shoes 2-1/2″ (2)
4211 Full Back Shoes 2-1/4″ (2)
1200 Full Back Shoes 2″ (2)
1134 Full Back Shoes 1-3/4″ (2)
1112 Full Back Shoes 1-1/2″ (2)
4410 Half Shoe 2-1/2″
4416 Half Shoe 2-1/4″
1045 Half Shoe 2″
1040 Half Shoe 1-3/4″
1038 Half Shoe 1-1/2″
1750 Collet 2-1/2″
1725 Collet 2-1/4″
1720 Collet 2″
1734 Collet 1-3/4″
1712 Collet 1-1/2″
853 Flare Tool
557 Domer Die 1-3/4″ – 2-1/2″
558 Domer Die 2-5/8″ – 2-3/4″
555 Female Ball Die 1-3/4″ – 2″
556 Female Ball Die 2-1/4″ – 2-1/2″
550 Male Ball Die 1-3/4″ : Swage 2″
552 Male Ball Die 2″ : Swage 2-1/4″
553 Male Ball Die 2-1/4″ : Swage 2-1/2″
554 Male Ball Die 2-1/2″ : Swage 2-3/4″
112 Swage Die 1-1/2″
134 Swage Die 1-3/4″
508 Arbor
498 Arbor Tip
499 Arbor Tip
473 Segment 1-3/8″ – 1-3/4″
475 Segment 2-1/8″ – 2-1/2″
476 Segment 2-1/2″ – 3″
97050 Die Spring
870 O-Ring Kit
815 Die Holder (853)
816 Die Holding Pin
855 Die Pins (Qty. 30)
1079 Full Shoe Spacers (2)
1080 Half Shoe Spacer
97302 Huth Instructional Video

2806

Click Above for Larger Picture

MODEL 2806
INCLUDES THE 028  DIE PACK

On Sale Now! $11,195.00
Free Shipping on Huth Pipe Bender!

Contact us with any questions

Easy-to–use manual knee pedal control
Push button control
Automatic Depth-Of-Bend selector
Auxiliary on/off switch
58,000 lbs of bending force – more than enough for 3″ tubing
Agricultural Main Cylinder
Flat tool tray
Bending die retainer
Heavy duty Swager/Expander
Rugged I-Beam construction safety guard package
Front swivel casters with brakes
220 volt, 60HZ operation
* Single phase req. 30 amp service
* Three phase req. 20 amp service
High voltage and high-speed options available.
huth pipe benders

2008

Click Above for Larger Picture

MODEL 2008
Does NOT come with the 028 die pack.
Contact Us for pricing of the 028 die pack.

On Sale Now! $9,199.00
Free Shipping on Huth Pipe Benders!

Contact us with any questions

Features

* Easy-to use manual knee pedal control
* Push button control
* Automatic Depth-Of-Bend selector
* Auxiliary on/off switch
* 58,000 LBS of bending force. Enough for 3 tubing
* Industrial main cylinder
* Swager tray
* Deluxe tool tray
* Bending die retainer
* Heavy duty Swager/Expander
* Rugged I-Beam construction
* Exclusive safety guard package
* Front swivel casters with brakes
* 220 volt, 60HZ operation
Single phase requires 30 amp service
Three phase requires 20 amp service
(Other voltages and 50HZ available)

Model 2008 is designed for high volume shops that need quick, precise, bending and end finishing.

The 2008 offers the convenience of a knee pedal control and a reduced size control panel. This allows the operator to get closer to the work area for more precision and less fatigue.

The Smart Automatic Mode features an adjustable return-to home position control. This unique, timesaving feature increases efficiency by assuring fast and easy transitions between multiple bends.

Model 2008 comes with a 5 horsepower motor and provides 58,000 LBS of bending force. An optional 7 ½ horsepower motor is available for 25% faster bending.

In the automatic mode, the automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth of bend plate.

The heavy-duty swager/expander gives you complete end finishing capabilities. The swager end accommodates 1 to 3 tubing. The expander end allows for expansions from 1 to 5 ½. With Huth’s Accu-Sizer bull’s-eye expanding system, you can dial in precise expansions every time.
huth pipe benders

2600

Click Above for Larger Picture

HEAVY DUTY BENDER
MODEL 2600

On Sale Now! $10,695.00
Free Shipping on Huth Pipe Benders!

Contact us with any questions

FEATURES

* 85,000 lbs of bending force
* Reinforced bending gates and frame
* Large volume reservoir
* Elevated center of bend
* 7-1/2 HP motor
* Heavy-duty swager/expander
* Push button controls
* Easy-to-use knee control for forward/reverse
* Automatic depth-of-bend selector
* Bending die retainer
* Rugged I-Beam construction
* Exclusive safety guard package
* Front swivel caster with brakes
* 220 volt, 60-hz operation
– Single-phase requires 50-amp service
– Three-phase requires 30-amp service
– Other voltages and 50-hz available
* Available without swager/expander Model 2601

The 2600 is designed for production work and bending heavier materials up to 3 OD. It meets the standards set by our other models for precise bending and end finishing.

The 2600 provides 85,000 lbs. of bending force in comparison to 58,000 lbs. produced by our other models. It comes standard with a 7-1/2 HP motor. A 3 tube bent to 90-degree in the automatic mode can be completed in 16 seconds.

The ergonomically designed knee control allows the operator hands-free control for quick tube location and securing of the tube. It is also invaluable for prototyping.

The smart automatic mode features an adjustable return-to-home position control. This unique, time saving feature increases efficiency by assuring fast and easy transitions between multiple bends. The automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth-of-bend plate. This feature assures accuracy and repeatability.

The swager/expander gives you complete end-finishing capabilities. The swager end accommodates 1″ to 3″ tubing. The expander end allows for expansions from 1″ to 5-1/2″. With Huth’s Accu-Sizer bulls-eye expanding system, you can dial in precise expansions every time.

1673

Click Above for Larger Picture

MODEL 1673
On Sale Now!
 $4,885.00

Free Shipping on Huth Pipe Benders!

Contact us with any questions

Mounted on its own easy-wheeling cart, Huth’s Model 1673 Portable Swager/Expander equips you to form ball joints, slip joints, flares and flanges and perform doming and reducing anywhere in your shop. 

5 HP Motor, single-phase (30 amp), or 3-phase (20-amp)
Runs on 220 volt, 60 Hz supply. 50 Hz and other voltages available.
25,000 pounds of expanding power
A 3-1/2″ cylinder
Expanding capacity from 1″ to 5-1/2″
Features Huth’s Accu-Sizer system
Adjustable Collar for expanding 1″ to 3-1/2″
Collet Holder for 1″ to 2-1/2″ O.D. tubing
Swaging capacity from 1″ to 3″
“See Through” safety guards for increased protection
Front swivel caster with brake
20′ power cord
Compact design – 40″ high, 37″ long, 24″ wide.
Includes part 41047, Adjustable Collar, and 891, Collet Holder.

1685

Click Above for Larger Picture

MODEL 1685s
On Sale Now!
 $1595.00

Free Shipping on Huth Pipe Benders!

Contact us with any questions

Portable Expanders: Unmatched Sizing Accuracy, Under the Car or on the Bench 

Model 1685 Mitey Mate Jr.’ Portable Expander

Model 1685 Mitey Mate Jr.
Huth redefines expanding portability and convenience with this down-sized, air-powered offspring of its popu-lar Mitey Mate IITM expanding unit. Ideal for making flares*, ball joints”, and slip connections under the vehicle or on the bench, Mitey Mate Jr. is not a lesser expander: It delivers both the power and the accuracy you demand.

Set to operate at 3200 psi (shop air pressure between 80 and 120 psi maximum**) this pint-sized power-house puts 17,000 pounds of expanding force in your hands. Mitey Mate Jr. also comes with tooling to expand 11/2″ to 21/2″ I.D. mufflers and pipes (3″ and 31/2″ capability with additional tooling).

It also comes with Huth’s unique Accu-SizerTM System for right-on expansions, job after job.

The expander itself, with its high-impact pistol grip, re-movable arbor tips and simple-to-set bulls-eye sizing adjustments, weighs only 7 pounds. All three pieces to-gether weigh only 34 pounds.

The handy storage unit, which holds the expander, the three segment sets and one of the two detachable ar-bor tips, is 9″ high by 101/2″ square. The power pedal is only 8″ high, 10″ long and 5″ wide, and fits under the storage unit.

*Requires use of No. 440 flaring segment. **Air regulator included in package. Requires use of ball joint segment tools.

LATEST POSTS

Accepted Forms of Payment

Business checks
Personal checks
Bank checks
Wired funds
2.9% Fee applied to credit cards & PayPal

 

Call us at (941) 232-4627 or fill out our contact form and let us know what you are looking for and any questions you may have.

   


LISTEN TO PAT..

“Hey I just wanted to say that if you ever need a referral or someone to vouch for you, please feel free to give out my email and I will put in a good word. It's very hard these days to find good people who actually 'care', and you should.. [more]”
Pat P - Kustom Flames